FLOOD RESPONSE TEAM
MFP-500 + DryForce
Bulk-water pumping and industrial drying as coordinated, independently deployable trailer concepts.
AMERIPRO / PROPOSED SYSTEMS
Future
Concepts.
Mobile response, resource recovery and modular infrastructure. Explore the next systems in development.
Explore the concepts → Proposed concepts — not yet built · Ratings, costs and performance require validation
RESPONDRemove water and support drying
SUPPORTTemporary hybrid energy
RECOVERWashwater and grease resources
MOBILE INFRASTRUCTURE / CONCEPT LIBRARY
Explore the developing fleet.
Each concept links to its design study, interactive planning tools and supporting documents. Existing water-treatment work remains accessible from its own portal.
MOBILE HYBRID POWER
HybridForce-60
Generator-and-battery architecture with an engine-off / recharge planner. Study targets: 60 kWh nominal storage, 40 kW inverter and 45 kW generator.
WASTEWATER RECYCLING
Reclaim-25
Source-specific washwater treatment for qualified nonpotable reuse, with product hold and residuals storage in the water-balance model.
GREASE RESOURCE RECOVERY / NEW
SmartTrap + GREX-1000
Automated restaurant grease recovery paired with a proposed permanent receiving, separation and dewatering facility, evaluating AmeriPro’s existing screw press and separator. Product is a candidate fuel feedstock pending qualification.
PREFABRICATED PUMP SKID / NEW
PPS-200 Duplex Skid
Forklift- and crane-placeable duplex horizontal centrifugal pump skid (2 × 200 GPM @ 120 ft TDH study baseline, 2 × 15 HP VFD) for tank-farm transfer, plant utility boosting and screened residual handling.
COLLECTION TO RECOVERY
Develop the grease-to-energy chain.
Track restaurant collection, oil recovery and residuals as one system. The study models the batch mass balance and product economics.
Start with the feedstock
Recovery and dewatering produce a candidate oil-rich material. Fuel-grade certification, further conversion, buyer acceptance and receiving arrangements are separate development gates.
Open the new study →MODULAR TRANSFER & BOOSTER / PPS-200
Prefabricated industrial pump skid.
A compact 8 ft × 5 ft structural steel skid with duplex centrifugal pumps, 6 in flanged manifolds and local VFD/HMI controls.
2 × 200 GPM study baseline
Test lead/standby vs. parallel operation, total dynamic head, shaft BHP, VFD electrical kW and available NPSH margin across booster, Reclaim-25 and industrial transfer presets.
Open hydraulic planner →Manifold & cost basis
Review equipment tags (P-1701A/B, HDR-1701/1702, CP-1701), the 2,850 lb dry / 3,250 lb wet mass study and the $62,000 base ($74,400 w/ contingency) budget.
Read concept design → · BOM & costs →Mobile water treatment
Continue to the MWTP-50C, MWTP-50 and MWTP-250 program and its engineering tools.
Open water-treatment portal →